Mashup Monday: 22 Different Ways To Do A Combination Coffee Station And Beverage Bar

I don’t have a good coffee house near me. And honestly, even if I did, why would I want to pay coffee house prices when I can do my own Starbucks DIY? When I started developing my perfect design for a coffee bar at home,

(what really happened was I am almost done with the kitchen design and realized I have NO SPOT for the coffee),

I suddenly realized that this space also needed to do double duty as a home whiskey/bourbon bar (with wine storage). With five kids and two home offices we are seriously short on extra real estate and it’s super important to make EVERY ROOM work really hard. So, here are my favorite DIY coffee bar ideas, that also happen to be able to accommodate a whiskey bar set up… P.S. It’s going in the dining room.

*This post may contain affiliate links. Please see full disclosure at the end of the post.

So, the first thing I did was make a wish list of what I wanted for the home bar:

  1. A pretty bar sink (doing a dry bar is much cheaper, but in my forever home, I’m not going to skimp on the extras)
  2. Storage for bar glasses and extra mugs (Rainman has an extensive collection that I have not been able to smuggle out of the house into the garbage)
  3. Hanging under cabinet storage for wine glasses
  4. A combination beverage fridge for white wine (we drink red wine at room temperature like uncultured heathens but I like to keep chardonnay on hand for friends that drink white) and soda mixers like ginger ale and coke
  5. Counter space for the coffee machine
  6. A pot filler for the coffee machine
  7. Storage for bags of coffee and my herbal tea collection
  8. Room on the counter for cocktail tools
  9. Room for displaying and storing liquor for cocktails

So, here are some of my favorites I found that are capable of hosting coffee, wine, and bourbon:

Screen Shot 2020-12-30 at 2.21.51 PM
Via @snow_builders on Instagram

 

Via @papermoonpainting on Instagram.

 

Via @southharlow on Instagram.

 

Via @dvharchitects on Instagram

 

Via @kimberlyanddarryl on Instagram

 

Via @kimberlyanddarryl on Instagram

 

Via @kimberlyanddarryl on Instagram

 

Via @kimberlyanddarryl on Instagram

 

Via @kimberlyanddarryl on Instagram

 

Via @kimberlyanddarryl on Instagram

 

Via @haris.kenjar on Instagram

 

Via @haris.kenjar on Instagram

 

Via @pamelahopedesigns on Instagram

 

Via @creativemines on Instagram
Via @creativemines on Instagram. Designer: @taysandcodedesign on Instagram.

 

Via @splendorinthesouth on Instagram.
Via @splendorinthesouth on Instagram. Designer @pillar_and_peacock and photo by @victoria_pewitt on Instagram.

 

Via @jeanstofferdesign on Instagram
Via @jeanstofferdesign on Instagram

 

Via @marieflaniganinteriors on Instagram
Via @marieflaniganinteriors on Instagram

 

Via @devolkitchens on Instagram
Via @devolkitchens on Instagram

 

Via @parkandoakdesign on Instagram
Via @parkandoakdesign on Instagram

 

Via @northshorenest on Instagram
Via @northshorenest on Instagram

 

Via @tracyhardenburgdesigns on Instagram
Via @tracyhardenburgdesigns on Instagram

 

Design by @doniphanpmoore on Instagram
Design by @doniphanpmoore on Instagram

 

Which one is your favorite? Let us know in the comments below!

Check out more of our design inspiration and high-end DIYs on the blog!  Cheers!

*Legal stuff:

I am honest about my experiences with different products and write because I enjoy it.  I do however, have the opportunity to earn money for my writing, also.

Slavetodiy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.  Amazon offers a small commission on products sold through their affiliate links.  Each of your purchases via our Amazon affiliation links supports our cause at no additional cost to you.

If a blogger links to an Amazon product (with a special code for affiliates embedded in the link), and a reader places an item in their “shopping cart” through that link within 24 hours of clicking the link, the blogger gets a small percentage of the sale.  Amazon links are not “pay per click.”  If you click on the product link and stay around Amazon and purchase something else, however, I will get a commission on that sale.

This site also contains affiliate links through //Commerce/Sovrn. //Commerce or our Publishers may be compensated when you click through links on our site.

.

Kitchen Crush: The Best Ways To Transform An Outdated Kitchen On A Tiny Budget

What I remember most about my first condo was how much I hated the kitchen. Actually, hate might not be a strong enough word. It was dark and depressing, with a weird window and aged-orange vertical shades, all illuminated by a florescent fixture with brown burn marks on the plexiglass cover. The condo itself had space and was the right price, but the kitchen was awful. It was tragic. However, my total budget for transforming the space was right around ZERO dollars. Even the grocery budget was tight, at the time, so much that I sometimes worried about being able to buy diapers for my one year old. So, how the kitchen looked wasn’t a priority, regardless of how depressing it was to cook in it.

*This post may contain affiliate links. Please see full disclosure at the end of the post.

I’m betting many of you can relate. Stuck with dated, 80s arched doors or a too-dark 70s finish, or even worse, the orangish-tannish builder grade oak cabinets of the late 80s and 90s… the scalloped arches over the kitchen sink, the brown and orange vinyl flooring. All of this made MUCH worse by the endless taunting from Pinterest and Instagram: the gorgeous, highly edited kitchen photos of IG starlets showing off the latest dishes and gadgets they’re creating and using in their maddeningly perfect kitchens.

I understand. I’ve BEEN THERE. But, I’m going to tell you a secret: You CAN transform a kitchen you hate on a tiny budget. I’ve done it, multiple times.

Now, I’m not going to tell you that I’m still in that place, because I’m not. That was twenty years ago and I’ve been Blessed financially since then, so I’m working on planning my FOREVER kitchen in a MUCH larger home and loving every second (keep the FAITH, you’ll get there!). However, I want to share my secrets with you… I want to share how you can make your kitchen a place you like to cook, even take pictures of, especially if you’ve got a little bit of cash for supplies and energy to do the heavy lifting, I’ll tell you how to make BIG impact transformations for just a little bit of money.

So, here’s the big impact list: add moldingcabinet color, hardware, counter kits, counter stools & kitchen furniture, light fixtures, repurposed furniture island, and, yes, backsplashes.

Add Molding:

You may not realize when you look at those horrid 70s, 80s, and 90s kitchens what in particular makes them so hideous, but I can tell you for sure that one main thing is the soffits! Some of them are for no reason at all other than to close the space in above the cabinets, and others house vents, etc. However, this is fixable! You can add molding over soffits or close in spaces above cabinets to completely update cabinets and bring them into this century! There are some really neat molding stackups I’ve seen done and it can totally change the look of a kitchen for not very much money!

Check out this incredible makeover from Remodelandolacasa.com. A combination of paint and some smaller build projects, including adding molding to the ceiling, created a dramatic transformation in this great kitchen before and after:

remodelandolacase.com

remodelandolacasa.com
Isn’t that amazing the difference? Adding molding completely changed the look and feel of the cabinets. To see this whole transformation, go to https://www.remodelandolacasa.com/2012/01/kitchen-remodeling.html

 

Cabinet Color:

Cabinet Painting is ALL the rage these days, and with good reason. A new color can totally transform the space. On the positive side, if you have a 70s or 80s kitchen, chances are the cabinets are solid wood and will hold up really well to sanding and painting.

Pro tip: beware of the tutorials that tell you to slop on some paint with a brush. It’s going to turn out like poo and you’ll regret it. There’s a cheaper way to do this that has GREAT results. There’s a cute little basic paint spray gun that you can get for about $35 bucks that will take your cabinet paint job from “Yikes, she painted her cabinets” to “wow, how did you afford new cabinets?”

I recommend the paint from Benjamin Moore that makes it look and feel like a hard factory finish. If you’re one of those farmhouse gals that’s dreaming of a white kitchen, Benjamin Moore’s White Dove in CO-INSL-X Cabinet Coat is the BEST option. This is an enamel and will dry to a hard finish. It’s AWESOME. But, that paint is NOT cheap. If you can’t afford it, run down to the local hardware store and the paint guy should be able to tell you which paint to buy.

One of my favorite transformations is from Laura at inspirationformoms.porch.com. She did a heavenly flip on her kitchen:

Collage-before-and-after1
How’s that for a fantastic before and after on kitchen cabinet paint (and did you notice the molding at the top of the cabinets???). To see this whole transformation go to https://inspirationformoms.porch.com/kitchen-before-and-after-reveal/

 

Hardware:

New hardware, and swapping out dated hardware, can completely transform a kitchen all by itself. It’s like remembering accessories when you get dressed up: the perfect necklace and jewelry to accent and improve your cute outfit. Think it’s expensive? Think again.

One of the coolest things that has happened because of Amazon in the last few years is that competition has SIGNIFICANTLY reduced the cost of cabinet hardware. The 3″ Stainless Steel Bar Kitchen Cabinet Pulls I purchased for a renovation in 2011/2012 at $25 each you can buy on Amazon today for a quantity of 25 for the same price (try to visualize the steam coming out of my ears). Yes, THEY’RE LITERALLY A DOLLAR APIECE. This is a project you can afford, and you don’t need any specialty tools to install them. If you purchase hardware with the same hole spacing as the old ones, you won’t even need to drill.

Country Living Magazine has a great blog post on easy DIY and inexpensive hardware updates. It’s amazing to me what a difference hardware makes, and how it can COMPLETELY change the style of a kitchen.

diy-kitchen-cabinet-hardware-ideas-1558648318
From Country Living Magazine https://www.countryliving.com/home-design/decorating-ideas/g27572367/kitchen-cabinet-hardware-ideas/

 

Countertop Update Kits and Butcher Block: 

I know you want solid surface countertops. I get it. I love them, too. But, guess what, you can’t afford them right now. So, you’ve got two GREAT options:

Tiny budget: Vinyl contact paper. There are very convincing vinyl self-adhesive countertop paper kits that can make your laminate countertops look like Carrera Marble. They have great reviews and cost about $29 bucks. But, be careful with these: they won’t stand up to abuse or hot pans.

Small budget: Butcher block! It’s super popular right now and I have a great post on Where To Find The Best Deals On Butcher Block Countertops if you decide that’s the right option for you! To give you a ballpark idea, when I wrote the article, you could purchase 50 inches of butcher block countertop from the Home Depot for $105 plus tax. You’ll need some special oil to treat it and some screws to install it. How awesome is that?

Pro tip: You can find left over granite slabs on Craigslist and letgo for around $50 if you scour the internet and be patient. It’s not an easy project, but if you have any experienced craftsmen in the family, they can help you, so be on the lookout!

One of my favorite countertop updates is from my friend Krystle at Spruceandabide.com. She and her husband did a kitchen flip and I just love how it turned out (and definitely give them a follow on Pinterest and IG, they are the cutest couple ever):

Spruceandabide.com
Krystle from Spruceandabide.com did a gorgeous butcher block countertop update. You can read all about it at https://spruceandbide.com/our-rustic-kitchen-makeover-a-mini-tour/

 

Counter Stools: 

Maybe your parents and friends donated some furniture to you when you moved in, and you know what? They were so generous because they didn’t want it anymore. Because it’s ugly. How are your barstools? Kitchen furniture can make your space look dated really fast. You can buy some VERY reasonable new bar stools both on Amazon and, my personal favorite place to find deals, Overstock.

One of my favorite types of stools are tractor seat stools, they’ve been a thing in my native Vermont for several decades but have picked up steam more recently (thanks, Joanna). If you watch for antique tractor seats on Craigslist, you can add them to the top of a basic wooden stool, for about $25 each (plus the cost of the tractor seats and a little spray paint)!

Tractorseatstool
Tractor Seat Stool From Overstock https://bit.ly/2X53QN8

 

Light Fixtures:

I’m not suggesting that you can get REALLY NICE light fixtures at this point in your life. But, what if they looked just like really nice light fixtures but were a lot cheaper (come to think of it, why are there more expensive fixtures when you can buy cheaper ones)? Once again, thanks to global competition, you can get some really nice looking light fixtures for a lot less than you’d imagine!

But, which ones should you swap out? Well, the giant florescent light fixture I would leave alone. I know it’s a bummer, but changing those out is not a straightforward process and I don’t want you to get mad at me for suggesting it (the replacement fixture isn’t that much, but it leaves an area of the ceiling needing repair and it’s a big mess). If you REALLY hate it, go get a new piece of plexiglass (they have seeded glass and rain pattern plexi panels cheap) for it and paint the wood on the outside to match your cabinets.

However, some light fixtures are very straightforward to swap out: if you have an outdated dome light over your kitchen sink, that’s a great opportunity to swap it for a pretty pendant for about $25 bucks. You can get a Three Pack of Industrial Edison Bulb Pendants to replace island lighting for $35 bucks! These might not be Pottery Barn fixtures, but I’m betting that your friends can’t tell the difference and YOU are going to love them.

 

Edisonbulbpendant
Edison Bulb Pendants (Pack of 3)Find on Amazon at https://bit.ly/2X53QN8

 

Repurposed Furniture Island:

One of my favorite kitchen updates is seeing furniture transformed into functional kitchen islands (for a LOT cheaper than a custom build or using store bought cabinets)! If you want to see lots of ideas on this, check out our design inspiration post on Kitchen Islands Out of Repurposed Furniture and Materials! Craigslist finds are my favorite source for these, or dressers you couldn’t find a purpose for, etc. The point is, the island adds counter and storage space for next to nothing in cost if you’re creative!

My favorite idea is fancy antique pianos that are no longer working… how cool is this?

Mashup Monday: Kitchen Islands Out of Repurposed Furniture and Materials
Mashup Monday: Kitchen Islands Out of Repurposed Furniture and Materials: From This Old House “Salvage Projects You’ve Got To See”

 

Backsplashes:

What’s popular right now? At the Home Depot you can get 3X6 Bright White Subway Tile for 15 cents each (and they generally ship free to your house)!  That means that for the entire run, let’s say you have 10 linear feet of counters (and an 18 inch tall backsplash), the tile would cost you $19 plus tax. Now, once you add in the mortar, grout, and basic tools, the total will probably be closer to $100 bucks. But, what a HUGE impact! One of my favorite subway tile transformations is from my friend Krystle @spruceandbide on Instagram. Isn’t it cool???

kitchenremodel-spruceandbide-5
Kitchen backsplash update from Krystle @spruceandabide on Instagram. Check out the whole kitchen update athttps://spruceandbide.com/our-rustic-kitchen-makeover-a-mini-tour/

 

The point is, just because you’re broke doesn’t mean you have to live and cook in your depressingly outdated kitchen. There are absolutely ways to update your kitchen without spending a bunch of money!

How have you updated your spaces on a small budget?  I’d love to hear about it!

Thanks for stopping by and check out more design inspiration and DIY on our blog. Cheers!

*Legal stuff:

I am honest about my experiences with different products and write because I enjoy it.  I do however, have the opportunity to earn money for my writing, also.

Slavetodiy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.  Amazon offers a small commission on products sold through their affiliate links.  Each of your purchases via our Amazon affiliation links supports our cause at no additional cost to you.

If a blogger links to an Amazon product (with a special code for affiliates embedded in the link), and a reader places an item in their “shopping cart” through that link within 24 hours of clicking the link, the blogger gets a small percentage of the sale.  Amazon links are not “pay per click.”  If you click on the product link and stay around Amazon and purchase something else, however, I will get a commission on that sale.

Slavetodiy.com is also a Sovrn affiliate advertiser which works similarly.

How To Use An Inexpensive Paint Sprayer For Painting Cabinets or Furniture

I have been wondering about using a paint sprayer for years now, because of course I see all these gorgeous finishes on people’s cabinets, furniture, and small paint projects. So, I did a little research, and finally settled on a small project paint gun that is inexpensive, works really well, and is very simple to set up and clean up. Here is the process and what we used to get outstanding results!

*This post may contain affiliate links. Please see full disclosure at the end of the post.

The first step is having a place to paint. Now these doors were unattached and I REALLY didn’t want to do prepwork inside to paint (especially because of the cats). So, we waited for a day when the wind was relatively still, and set up a clean work surface on the ground and screwed in eyelet screws into the top of the cabinet doors. Then we wired them to an outdoor arbor so they were suspended and accessible.

What you’ll need:

A paint gun: we used the Critter Paint Gun, (great design, very simple, and the best news: CHEAP!).

Paint straining bags: you can get these for a buck and change at hardware stores or buy them online: Paint Strainer Bags.

A compressor, hose, and basic attachments. We have a large Dewalt Compressor (which I bought apparently thinking we’d be framing walls and working in a commercial building environment) but we used the smaller and much more easy to wield Bostich Air Compressor for this project).

First we dry fitted everything on the gun to make sure it worked with the compressor hoses.

How To Use An Inexpensive Paint Sprayer and Get Outstanding Results
How To Use An Inexpensive Paint Sprayer and Get Outstanding Results

 

Then we used one of the paint strainers to strain the paint into the jar.

TIP FROM RAINMAN: THIS IS AN IMPORTANT STEP. If you don’t strain the paint, little chunks will clog up the tiny tube that feeds the sprayer.

How To Use An Inexpensive Paint Sprayer and Get Outstanding Results
How To Use An Inexpensive Paint Sprayer and Get Outstanding Results

 

We realized after the first few minutes that the best method is to put the strainer all the way in and then pour the paint in. It lends some weight to the process and makes it strain MUCH faster.

How To Use An Inexpensive Paint Sprayer and Get Outstanding Results
How To Use An Inexpensive Paint Sprayer and Get Outstanding Results

 

Once the paint is in, lift the strainer out until it has all drained into the mason jar. We layed the bag down on our clean surface, knowing we would use it again, but if you’re taking a long time, you might want to rinse it with a hose between uses (we have not found a non-messy way to do this).

How To Use An Inexpensive Paint Sprayer and Get Outstanding Results
How To Use An Inexpensive Paint Sprayer and Get Outstanding Results

 

Attach the mason jar back to the gun, and make sure your air compressor is set at 30 PSI.

TIP FROM RAINMAN: USE SCRAP WOOD TO GET PSI, LIQUID NOZZLE, AND DISTANCE SET (35 PSI WITH LIQUID NOZZLE CENTERED WORKED WELL WITH THIS PAINT AT AROUND 4 INCHES FROM SURFACE).

Rainman sprayed around the edges, then into the corners, then did a good layer, spraying back and forth across it.

How To Use An Inexpensive Paint Sprayer and Get Outstanding Results
How To Use An Inexpensive Paint Sprayer and Get Outstanding Results

 

Spraying around the outside:

How To Use An Inexpensive Paint Sprayer and Get Outstanding Results
How To Use An Inexpensive Paint Sprayer and Get Outstanding Results

 

Door two: holding it steady to start spraying (this is where those eyelets and wire are handy).

How To Use An Inexpensive Paint Sprayer and Get Outstanding Results
How To Use An Inexpensive Paint Sprayer and Get Outstanding Results

 

Spray the front sides, then the back sides, and give it a little time to dry. Make sure you get any outside edges you will see.

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update; Painting the doors with the Critter

 

Depending on the paint and color, you will need at least two coats. We did three for good measure and for even coverage.

TIP FROM RAINMAN: LIQUID NOZZLE MAY NEED TO BE CLEANED (PICK OFF ANY DRIED/DRYING PAINT), ESPECIALLY IF YOU LET THE GUN SIT BETWEEN APPLICATIONS.

Pose for a “finished painting” photo:

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update; Finished Painted Doors

 

We took the doors into the downstairs shower (where there are no cats if we close the door) and where we had a rod across the middle and resecured them to the rod for three days to make sure they were really good and dry before we mounted them.

TIP FROM RAINMAN: CLEAN GUN WITH PAINT THINNER BEFORE PAINT DRIES ON GUN SURFACES.

Clean-up: Rainman rinsed out all of the paint from the mason jar, rinsed all of the tubing and the outside of the paint gun off, and then added mineral spirits to the jar. He sprayed that all out to clean the inside of the tubing and the inside of the gun. Then he dumped that out, added water, and did it again. Take the components apart and let them dry completely before you put it back together. We stored it back in the box and will definitely use it again!

TIP FROM RAINMAN: NOT SURE HOW LONG JAR GASKET WILL LAST; PROBABLY NEED TO ORDER SPARES.

Here are the doors mounted on the fireplace:

How To Use An Inexpensive Paint Sprayer and Get Outstanding Results
How To Use An Inexpensive Paint Sprayer and Get Outstanding Results

 

Here they are mounted and COVERING THAT AWFUL GAPING HOLE!

How To Use An Inexpensive Paint Sprayer and Get Outstanding Results
How To Use An Inexpensive Paint Sprayer and Get Outstanding Results

We had already painted the rest of the fireplace with brushes and rollers. If I had realized how easy it was to use the sprayer and how little overspray there was, I would’ve used The Critter to paint that, as well. The finish looks VERY professional, and I’ll definitely be using it to do our cabinets once we get to that point.

I’d love to see your paint projects and hear about how this little paint gun worked for you!  Please share in the comments below and check out more great project tutorials and inspiration over on our blog.

Cheers!

 

*Legal stuff:

I am honest about my experiences with different products and write because I enjoy it.  I do however, have the opportunity to earn money for my writing, also.

Slavetodiy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.  Amazon offers a small commission on products sold through their affiliate links.  Each of your purchases via our Amazon affiliation links supports our cause at no additional cost to you.

If a blogger links to an Amazon product (with a special code for affiliates embedded in the link), and a reader places an item in their “shopping cart” through that link within 24 hours of clicking the link, the blogger gets a small percentage of the sale.  Amazon links are not “pay per click.”  If you click on the product link and stay around Amazon and purchase something else, however, I will get a commission on that sale.

Slavetodiy.com is also a VigLink affiliate advertiser which works similarly.

The Dark and Moody Fireplace Update

If you follow us, about a year ago I started thinking about the fireplace (and how NOT enamored with it I was). I dug up some fireplace inspiration in the hopes that I would find something awesome and reasonably cost friendly.  The thing is, we have some really pretty millwork around the fireplace, but over the fireplace is an awful TV space, meant for one of those gigantic tube TVs. Aside from the part where it a terrible waste of space, it is a complete eyesore, as well.

*This post may contain affiliate links. Please see full disclosure at the end of the post.

The more I looked, however, the more I realized that I have REALLY expensive taste. The fireplaces I love would require a complete gut, a big mess, and a LOT of money (like upwards of $3000 just for the fireplace surround). So, the alternative is to keep what I have and build upon it. I came up with a design that I think I’m really going to love, that’s very US, and added to it a bit. Rainman is going to kill me when he sees what I added to the project (but ultimately he’ll love how it looks).

This is what we’re starting with (the before):

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update, Before We Started

 

Okay, so it’s not really that bad. I should stop my crying and just stay with what I have, right? (insert evil laughter).  We both know that’s not going to happen. And, is there a reason that I’m showing the whole wall and not just the fireplace? Oh yes, there is. But, we’ll get to that.

Right now, it is a very classic-ish, plain fireplace with some pretty mill-work and a crazy, giant opening up top. This is a shot of it with the cabinet doors that I ordered from Cabinet Door World. So, yeah, you can make cabinet doors (pretty easily), however, with no working wood shop currently, and very little time, I ended up ordering them instead. The quality is very good and the ordering process was easy. I got them exactly the size of the opening, so I’m sure we’ll need to do some sanding once we dry fit the hardware.

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update; Doors To Be Mounted Above

 

For the color we chose Benjamin Moore’s “wrought iron” and I think it will be fantastic. I’m planning on using it for the cabinets we’re moving out of the kitchen into the mudroom area, also, so this will be a good test run. Check out the tutorial on how we used a great, super cheap spray gun to paint the cabinet doors!

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update; Our Favorite Paint! Benjamin Moore, Wrought Iron

 

Project tip: We were painting over a semi-gloss, so we sanded with a sanding block first, then wiped down the whole thing and let it dry before painting (a good three coats because of the color!).

The cabinet hardware, from House Of Antique Hardware is still backordered, so I will update once that comes in and we get the doors up, but for now, I couldn’t WAIT to show you how amazing the fireplace looks with a fresh coat of paint! Drum roll, please.

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update; Painted and Updated

 

It blows my mind sometimes how much a simple color change can transform a space! (And yes, I’m planning on painting the walls… but there are more dining room projects that have to happen first, like the new doors and the stone veneer on the wall to the left of the fireplace… Welcome to my project A.D.D.)

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update

 

And one more, just because I’m so in love:

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update; With Pretty Lighting

 

Project Update:

You’ll remember that we weren’t actually done, I just had to show you the paint because I was way too excited. The most difficult part of the project was still to come: actually installing the doors over the fireplace.

A quick word of advice: If you have to work with your spouse, find something that works for you. I find a combination of wine and a mute button work best when he’s doing something for me. I throw in some compliments and thank yous about the awesomeness of his work and shut my mouth. If I have the urge to OPEN my mouth and say something, I open it and insert wine. It has worked out pretty well thus far and has yielded tremendous results.

I ordered the doors so they exactly fit in the opening. That means that in order to account for the fact that the opening is not square and unlevel areas on the mantel, the doors had to be dry-fit, then trimmed down. Now, let me tell you, this is the most Rainman-iest project in Rainman land. It also means that we couldn’t paint them until they were fitted and trimmed.

Full disclosure: I love this man. 

First, was the problem of explaining why we needed to build trim above to act as a stop for the doors and fill in the dead space above when the doors are closed. It’s not that he doesn’t understand my “I don’t want a gap above the doors”, it’s just that explaining something conceptually doesn’t always translate to something concrete in his brain. So, a little while later, he devised a solution.

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update, Installing Trim Over Fireplace

 

“YES, my love, that will fill in the gap. It’s perfect. What’s the next step?” (sips wine)

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update, Trim Above Doors

 

 Back to Rainman Land: 

This installation involves a plumb-bob, multiple levels, obsessive measuring, remeasuring, shimming, shimming again, dry fitting, shimming again.  Measuring again.  Splitting the difference. Rainman muttering about the lack of squareness in the opening. Let’s just say that I may or may not have started drinking before 5 PM that day (but once again, in my hurry to slap it up there and be done with it, I’m quite sure it wouldn’t have been so downright balanced and lovely in the end).

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update, Shimming Doors

 

After it was shimmed (I don’t mean to undersell the length of that process), I held the doors while he aligned the hinges (more wine, more wine, more wine), and eventually, after much careful sanding and trimming, the doors were hung, and had all the clearance they needed to open and close.

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update, Doors Dry Fitted

 

Now, we are waiting on it to be not blustery weather so we can take the doors down and paint them.  And then we will actually be done.

Update: Finally painted!

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update; Painting the doors with the Critter

 

Check out our post on how to use this awesome little paint gun and get that professional, WOW finish! You can find the paint gun we used, the critter spray products siphon gun, on Amazon.

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update; Finished Painted Doors

 

I’m really fond of drum rolls, so let’s do that again.  Here’s a shot with the doors on and DONE!

 

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update: Doors On And Ready To Hide The TV

 

And one with the doors painted, on, and CLOSED. WOOT! (Can’t see the TV, can ya, Russ?)

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update; Doors Painted, On, and CLOSED

 It may seem like a small thing to other people, but this project has been on the list for a long time. It’s just a matter of making it a priority and having the time to do it. But, of course, that makes each little change that much more awesome!

Here is the breakdown:

Project Cost:

  • Benjamin Moore Paint and supplies: $96.66
  • Two Cabinet doors: $149.57 (delivered)
  • House of Antique Hardware 2X Pair of 9″ Smooth Iron Flush Mount Spear Strap Hinges: $43.94

Total: $290.17

And just for fun, let’s see that before and after one more time:

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update, Before We Started
The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update: The After: Doors above the fireplace, fresh paint, and a new light fixture

 

It sure is amazing what some doors, paint, and a light fixture can do to a room, right??? And, here’s a shot with what it looks like with the dining table and chairs (which will soon be replaced, but that’s a story for another day!).

The Dark and Moody Fireplace Update
The Dark and Moody Fireplace Update, Dining Room With Updated Fireplace and Light Fixture

 

I would love to see before and afters on your own paint projects! Thanks for playing with us and, of course, cheers to all of your updates in the New Year and check out more project awesomeness on our blog.

 

*Legal stuff:

I am honest about my experiences with different products and write because I enjoy it.  I do however, have the opportunity to earn money for my writing, also.

Slavetodiy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.  Amazon offers a small commission on products sold through their affiliate links.  Each of your purchases via our Amazon affiliation links supports our cause at no additional cost to you.

If a blogger links to an Amazon product (with a special code for affiliates embedded in the link), and a reader places an item in their “shopping cart” through that link within 24 hours of clicking the link, the blogger gets a small percentage of the sale.  Amazon links are not “pay per click.”  If you click on the product link and stay around Amazon and purchase something else, however, I will get a commission on that sale.

Slavetodiy.com is also a VigLink affiliate advertiser which works similarly.