We are in the middle of a kitchen renovation, which is sure to last through the next century (the renovation part, I mean). However, the pace of said renovation gives me the time to make sure that EVERY detail is correct. As I have been researching the perfect forever kitchen for the last five years (who am I kidding, it’s been more like forty) I absolutely fell in love with the concept of rangehood surrounds.
Since I have smoked the house out searing steak on a weekly basis for the last decade, I already knew that we needed a kitchen exhaust fan, or more specifically, a rangehood. Having a kitchen hood vent is imperative for people who actually cook. We were living in a kitchen with AN UNVENTED microwave over the stove. Also see: “why bother” in the dictionary. That is the worst ever possible solution to sucking smoky air out of your house and is honestly something builders like because it’s cheap and easy. Well, I’ve got their number.
*This post may contain affiliate links. Please see full disclosure at the end of the post.
Anyway, have you seen all of those delicious British kitchens? Well, they’ve had this figured out for… well, I think forever. Duh, if you’re cooking, you need a hood. Even if theirs are a bit more understated than their more extravagant American counterparts, the idea is the same:
A command post, at the center of the kitchen, from which you rule your house: where you sing to obnoxiously loud mom music and shout back at kids from across the house “I can’t hear you” as you prepare something you weren’t sure what it was going to be until you started adding ingredients (or on rare occasions, trying to follow a recipe). Read: the maternal-Zen-zone from which location you create foods made of pure love and chubby mom sweat.
These spaces must be both beautiful and functional, so I have a few rules:
I absolutely must have counterspace on either side of the range. Seriously, the enclosures I see where it’s only the stove would in no way be conducive to actual cooking (but they sure are pretty). I recommend AT LEAST 24 inches of countertop on either side of the surround- we’re going with 30 a side.
Use materials that can’t get scorched. If you’re cooking so professionally that you need one of those gigantic hoods that you have to keep the cat away from (lest they are sucked into the intake like a runaway tornado) don’t you think you might risk some cabinet scorching? What about grease splatter? There shouldn’t be ANYTHING THAT CAN GET BURNED within the surround. (We are doing a mix of copper sheet backsplash with sealed marble tile, METAL UPPER CABINETS, and a copper hood. Everything will be safe from harm.)
It must be able to do whatever I want it to do. If I want to cook hibachi and make three-foot high flames, the hood better be able to handle it. Even though adding a hood that is anything over 400 CBMs requires an air exchange system, it is absolutely worth it. I usually get the most powerful ANYTHING that is offered, just to be sure.
(Speaking of which) Quick story: When I was researching hoods, I had the most appalling experience with an HVAC tradesman. I called him to get a quote on installing ducting in our kitchen for a range hood. He asked me how many CBMs my hood was going to have. I told him it was 1200 CBMs and he said, “Oh, you don’t need one with that many CBMs.” Please play that back in your head with the most absolutely misogynistic Eastern North Carolina accent you can conjure.
I took a deep breath, and said, “I’m listening.”
He proceeded to explain to me, in the most demeaning manner possible, how EVEN HE only had a 600 CBM hood and he had a big house made for entertaining, unlike mine, which he had never seen.
Now, I have strict rules about phone etiquette. I have taught my children by example that it’s very important (and almost ALWAYS works in your favor) to be kind to anyone on the phone. This applies to calling ANY CUSTOMER SERVICE ever. They deal with complaints all day, right? So, when you call them be the most patient customer they’ve ever had and be the one little bright shining light in their day! I have literally had customer service folks send me free stuff and thank me profusely for being nice to people whose fault it WASN’T that whatever problem it was happened. Catch my drift? Now here’s this guy, who I am about to ask to do a job for me, and I know that griping at him or complaining is not going to get me anywhere.
Well, I can tell you, I was two more condescending comments away from breaking my own phone rules. If I could’ve reached through the phone and grabbed him by the neck, I would’ve been unmoved by him choking on the gum he was loudly smacking in my ear between patronizing tidbits of advice.
He ACTUALLY said to me: “your husband’s going to be pissed at you if you’re running that fan in the kitchen and he can’t hear his football game.” I almost fell over.
So, after this man had given me his dissertation on why women like me don’t know jack or dog-poo about ducting or machines in general, I politely asked him, “So, say I wanted you to install this AND an air exchange system. Could you do it?”
“Well yeah, but it would be more money.”
“Okay that’s fine.” After he complained for a few more minutes about me wanting something I clearly didn’t need, he stopped short and told me if I was getting a rangehood it absolutely HAD to be a Wolf and nothing else would do (and I was being cheap if I decided to go with anything else), and pointed me toward “his” appliance salesman buddy in the next town.
By the time I got off the phone I was bewildered and… well…. I was PISSED (which is a relatively unnatural state of being for me). My husband got home from work and got a half an hour recount of the conversation I had with this… well I’ll leave out what I called him.
So Rainman politely asked me, “So, why don’t you call someone else?”
To be honest, this thought had not occurred to me. I was so wrapped around the axle I wanted to meet this guy so I could beat him at his game.
But I slowly deflated… and used a lifeline. I called my friend next door that had just had a beautiful new house built, and she gave me the number of their HVAC contractor- who came to the house, asked what I wanted done, devised a plan, and gave me a price. Oh, and he didn’t treat me like I had recently come to our world from another planet. They will have my business until I die.
Pro tip: The one thing that kept coming up over and over again during this discussion is that anything over 400 CBMs empties your house of air very quickly and that air is replaced by OUTSIDE air via the air exchange system (you know, the one Captain-pompous-pants didn’t want to install). I was warned that if that happened my home would be suddenly muggy in the summer or suddenly freezing in the winter. That is true, and it’s a concern. But it is also true that every time I sear meat it smokes my house out and we have to open all the doors and windows (and wrangle cats and a dog). You know what this does? You got it! Muggy and hot in the summer and freezing cold in the winter. I hope you can see me rolling my eyes from here.
But I digress. Here are a few neat ideas for rangehood surrounds I think you’ll enjoy:
What do you think? Could you see your space with a rangehood surround? I’m dying to show you ours!!!
Check out more of our design inspiration and high-end DIYs over on the blog!
Cheers!
*Legal stuff:
I am honest about my experiences with different products and write because I enjoy it. I do however, have the opportunity to earn money for my writing, also.
Slavetodiy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon offers a small commission on products sold through their affiliate links. Each of your purchases via our Amazon affiliation links supports our cause at no additional cost to you.
If a blogger links to an Amazon product (with a special code for affiliates embedded in the link), and a reader places an item in their “shopping cart” through that link within 24 hours of clicking the link, the blogger gets a small percentage of the sale. Amazon links are not “pay per click.” If you click on the product link and stay around Amazon and purchase something else, however, I will get a commission on that sale.
This site also contains affiliate links through //Commerce/Sovrn. //Commerce or our Publishers may be compensated when you click through links on our site.
For those of you that follow along with us, you already know that we’ve been in the middle of kitchen planning, designing, and installing on a kitchen in another state. I am in North Carolina and the kitchen that I designed for my mom’s forever home is in Vermont. Luckily for me, my sister and brother (who is our “contractor” and carpenter) are in Vermont and have done almost all of the heavy lifting themselves. My sister, who owns the home, has painted more than she ever wanted to paint in her life.
When we began talking about this project (when the property that adjoined my sister’s farm came up for sale), I think it was sometime around February (2020). When we started actually planning it, the idea was for my brother to have everything ready for me and my husband to drive up and help with the installation (especially because he thinks some of the design choices I made are a major pain in the butt). But, then this weird thing happened: a pandemic. Our trip obviously got delayed. But, on the positive side, my sister and brother were able to continue working on the rehab and the kitchen just about full time since everything was closed due to Covid.
Sneak Peek (the AFTER):
*This post may contain affiliate links and is sponsored by Lily Ann Cabinets. Please see full disclosure at the end of the post.
The Before
I was able to get a decent idea of the space from talking to my sister and lots of pictures and video chatting. I came up with a preliminary design that would save her time and money by leveraging the existing layout. We agreed it would be a nice kitchen.
In addition to detailed wall measurements, locations of lights, switches, plumbing, etc, I was working from the following before pictures:
The Design Style
I talked to my sister at length about the intended style of the house (she was doing a complete renovation, not just the kitchen). The house was, at the time of purchase, sort of a bad mid-century look. We agreed that “Vermont Cottage” was a good style to strive for, throwing in some modern conveniences, and some new cabinetry. Trying to save her money on the reno, I had suggested we try to paint and re-use some of the cabinets, but it would not have been as polished of an end look.
However, if it’s a total tear down, I have some great tips to save you money. The main component of a kitchen remodel is the cabinetry. There are so many cabinet options and they can run from $100 each to thousands of dollars each.
Thousands of dollars. “For a CABINET???” you ask. Oh yes, for a cabinet.
Anyway, here is the original “Vermont Cottage” mood board that I made for my mom’s forever kitchen to give my sister an idea of how I wanted the finished space to feel. You may notice that it has some polished elements, some rustic elements, and some commercial/industrial level elements also.
For my mom and her husband, we had some specific design considerations on top of the usual desire to create a timeless kitchen:
Her husband cooks greasy steaks on high heat almost daily: Although a dedicated hood was not in the budget, we chose a microwave that was capable of venting to the outside. We also planned a stainless steel sheet as a stove backsplash to make clean-up easier.
Her husband is a mechanic: If any of you have a mechanic in your house, you know that black fingerprints are a fact of life. We chose dark stainless for the appliances and beefy black hardware to minimize smudges.
My preliminary design had options to use the existing layout and cabinets, add some cabinets and move the sink under the window, and to add some cabinets and bridge shelves from IKEA to the wall that was blank in the kitchen. This design was the most budget friendly.
Then my sister brought my brother in to look at the space before we agreed on a design. He said, “let’s open it up.” Read: please scrap your entire layout. We’re doing this differently.
The problem was: inbetween the closed off kitchen and living room were two walls and a staircase that went to the basement. Apparently, for carpenters that wear superman capes, this is a non-issue. He informed us he was going to move the staircase to the other end of the living room, frame the hole in, build a new staircase with kneewall, and we would have one BIG, FANTASTIC, open living space.
So, I revised my plan, which doubled the cabinet space we would have in the kitchen, plus the overall aesthetic was going to be awesome!
The Design Plan
I got out my graph paper (yes, I am old school and I still use graph paper for my designs) and was back to the old drawing board. I put my wall measurements and locations of fixtures, etc (including appliance measurements) down onto graph paper and then proceeded to start filling in standard size (non-custom) cabinet sizes to see how much of the space I could use. It turns out, I was able to use almost every inch of the back wall and create a nice big kitchen.
While I was designing I was also researching pricing for cabinets. YIKES. There are a lot of options, and some of them, even their off the shelf prices (non-custom cabinets) are pricey. I’m always trying to find a good deal, especially when I’m spending someone else’s money. I found a company that was running a sale that has good reviews and had a cabinet style I liked. They also offered design services, so I figured getting a pro to look at my design couldn’t hurt, and I was curious to see what they would come up with.
This is what I sent them (I also told the designer we wanted to do an island with four base cabinets on each side):
Fancy, right? Ha.
Tip: You don’t need anything near as detailed as what I sent to the cabinet company. You can send them basic wall dimensions with locations of outlets, plumbing and light fixtures, and doors and windows, and they will design the kitchen for you!
Well, this is what they sent me back (and why we ultimately went with the company):
I was super impressed with the designer’s knowledge, and they have a whole tech team dedicated to rendering 3D images of your kitchen so you can easily visualize EXACTLY how it’s going to look.
I think it was about this time that I asked the company if they would like to sponsor our kitchen (we received a discount on the price of the cabinets), so we teamed up with Lily Ann Cabinets for the cabinets, and decided to go with RTA to save my sister some money on the ever-growing budget for the project. (Pssst, don’t tell them, but we were going to use them anyway because they were already the least expensive manufacturer I could find).
Ready to get started? My readers can use the code SDIY2018 at checkout to get 5% off your Lily Ann Cabinets order!
RTA cabinets are “ready to assemble” and my husband and I had previously installed some in our old kitchen, so the RTA thing didn’t scare me at all. My brother, on the other hand, flat refused to assemble them (and when he’s adamant I just go with it), and insisted we do it when we came for the kitchen install. We agreed and we moved forward with our planning.
Except, remember that whole COVID thing? The entire design and ordering process was accomplished by Lily Ann employees working from home, and the order assembled and shipped by a skeleton crew in their warehouse. Our planned working trip over the kids’ Spring Break was smack in the middle of the lockdown. And our ability to plan another trip was completely on hold with really no end in sight.
I sent the designer my sketch on Feb 28, 2020 and the cabinets were delivered April 14, 2020. The whole process, from starting the design to delivery of the cabinets, was less than seven weeks and that was during the pandemic lockdown.
Tip: Don’t hack up the old cabinets with a sledgehammer like the TV shows do. Why?
1) It’s super messy. Instead: you just need to remove a few screws to pop the whole thing off the wall.
2) You can either re-use the cabinets in your garage for extra storage or you can donate them to the Habitat For Humanity Re-store and get a donation slip from them that you can write off on your taxes (they’ll even come pick up your donations!).
Cabinet Assembly
By this time, the cabinets had been delivered and were sitting in a neatly packed palette in the garage. I think my brother started getting antsy, because he was going to put the flooring down after the cabinets went in, and we were still on a travel lockdown. So, suddenly I started getting pictures of cabinets going together and up against the wall.
I was a nervous wreck at first… I was holding my breath waiting for my brother to deliver the verdict that the cabinets were junk and were a nightmare to assemble. But, guess what? That didn’t happen. My brother, the wood snob/very talented carpenter was SUPER impressed with the quality craftsmanship and how easily the RTAs went together! I breathed a sigh of relief. Whew!
Not handy? It doesn’t even matter. Check out the following two videos from our build that show the complete assembly of an RTA cabinet box (which takes about 3 minutes total):
Of course, after the RTA box is assembled, the doors and drawers are attached, which takes a few minutes longer, but is still very simple.
Is it really that simple?: Yes! Here are some more photos of the cabinet assembly:
Installation
My brother quickly assembled all of the cabinets and started installing them. He was able to do this without me there, because he had a detailed layout guide from Lily Ann. With exact measurements he was able to do the entire installation.
Remember these?
Following the detailed layout the designer provided: they started tying them into the walls and the kitchen was really starting to take shape!
Using the design, he had the electrician put in all new can lights, outlets, and receptacles for the other fixtures.
The Rest Of The Kitchen Installation
My sister immediately got going on painting in the main living spaces, including the kitchen. She very carefully covered the cabinets and went to work.
Later, the floors went down and lights went up. My brother also installed the decorative panels on the sides of the cabinets so that the countertop people could measure accurately.
Next, the countertops went in (except for the kitchen island, which my brother had wood curing for).
They were finally ready to bring the appliances up and it was amazing how it ALREADY looked, even though it wasn’t finished. And we had a little problem coming up… We were supposed to do the “reveal” on my mom’s birthday in July. But, we were still unable to travel north because of COVID.
So, my sister and brother did a mini-reveal to show her the progress, knowing that we would be up soon to finish the space that still needed: molding, an antique for a spice rack, the stove backsplash, the backsplash above the counter, the cabinet hardware, the hanging herb garden, and the open shelving to the left of the sink. But, the before was still pretty awesome and my mom was blown away. Here’s what it looked like on her reveal day with my brother’s custom island top he manufactured from wood on his property and his wood mill:
And who doesn’t love a good reveal video? Warning: it makes me weepy every time.
What do you think? Would you use RTA cabinets for your renovation? Let us know in the comments below!
Ready to get started? My readers can use the code SDIY2018 at checkout to get 5% off your Lily Ann Cabinets order!
Thanks again to the team at Lily Ann Cabinets for making our build possible, to my sister, brother, and brother-in-law in Vermont for all of their hard work, and to my favorite Rainman for doing working vacations with me without a single complaint!
Cheers!
*Legal stuff:
I am honest about my experiences with different products and write because I enjoy it. I do however, have the opportunity to earn money for my writing, also.
Slavetodiy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon offers a small commission on products sold through their affiliate links. Each of your purchases via our Amazon affiliation links supports our cause at no additional cost to you.
If a blogger links to an Amazon product (with a special code for affiliates embedded in the link), and a reader places an item in their “shopping cart” through that link within 24 hours of clicking the link, the blogger gets a small percentage of the sale. Amazon links are not “pay per click.” If you click on the product link and stay around Amazon and purchase something else, however, I will get a commission on that sale.
Slavetodiy.com is also a VigLink affiliate advertiser which works similarly.